|
| |||||||||||||||||||||
 | |||||||||||||||||||||
| |||||||||||||||||||||
 |
| CUSTOMER SUCCESS STORIES Customers across a wide scope of industries have discovered the fastest, easiest way to get their low-volume pcbs assembled. The following comments are from just a few of the many happy customers who rely on Advanced Assembly for their project development success. We value the trust our customers place in us and work hard everyday to deliver accurate boards on time that exceed all expectations. _______________________________________________________________________________________________________________ "My company worked with AAPCB for the first time and found the quality of work to be excellent and product delivery to our specifications." "You guys did such a swell job that we'd like you to build 15 more! What is your schedule like and can you do the same 3 day turn?" Idexx Labs _______________________________________________________________________________________________________________
"I have just completed my fourth low-volume assembly job through AAPCB Assembly and my overall satisfaction with the company personnel are genuinely eager to accommodate and retain their customers. Project setup and board preparation is done in a and function great. I would definitely use you for future assembly jobs."
_______________________________________________________________________________________________________________
"The boards you stuffed for us worked out very well. I am very impressed with your capabilities. Thanks!"
University of California _______________________________________________________________________________________________________________
"The boards look fantastic!!! - thanks for the quick turnaround - I've tested about half and so far so good. Also, a big thanks to Jim who Thanks again !!"
_______________________________________________________________________________________________________________
"Thanks. I received the two fully-loaded boards today during our team meeting, so I was able to show them around. They look great. My compliments to you and your team for your incredibly quick turn and attention to detail!"
Sound Innovations _______________________________________________________________________________________________________________
"I appreciate the work you folks did to label the short parts on the boards where they were short - it was no problem for me to load those few parts since I didn't have to guess where they were. I really appreciate your hard work! Please let the folks in
Keithley Inc. _______________________________________________________________________________________________________________
"Our tests ran beautifully and the quality was great. The services that you provide are wonderful and wish to congratulate you and your team on a job well done. Thanks so much and if there are any more projects for you to do I will get in touch."
HYDRO _______________________________________________________________________________________________________________
"Your work was A-1." _______________________________________________________________________________________________________________
"The boards look great
Sentel Corp. _______________________________________________________________________________________________________________
"Wow that was fast!"
Spaulding Rehab _______________________________________________________________________________________________________________
"Thanks for the beautiful job on my last order."
NASA
"Jim (our engineer) was extremely pleased with the quality and overall look of the board. He was also pleased when he put the power to it, hooked up all the connections, and fired it up. He said the first (and only) two he tried worked GREAT!! He was extremely pleased with the boards. He asked me to thank you.
Tomorrow he is taking them to the first install of our system at the customer site, so you got them to us just in time. Thank you, sir. We greatly appreciate it."
Digital Recs _______________________________________________________________________________________________________________
"I appreciate the follow up. We have been very pleased with the boards. We are just about through all 100 boards of the 366hmms and did not have any real problems other than the initial problems with the pre-programmed processors. The 410FSM modules have been a breeze without any real problems that I have been made aware of. It is great to have something just work and being able to begin to take that for granted has reduced a lot of burden off myself and the other engineers here who are forced to troubleshoot from time to time.
I was really pleased with your quality and performance of those. I was a little concerned that all those fine pitch resistor networks and qfns would pose a potential problem, but for the most part you guys nailed it. I really appreciate your work on that and with 15 operational units including an entry into the innovation awards for the show I think we will definitely turn some heads."
Airpax _______________________________________________________________________________________________________________
"Nice job! there were some false starts on my docs, and I sent Jim through the twister, and you pulled it off. Thanks to Mike too!"
"Yes, I can definitely recommend them. I have done several different boards with AAPCB Assembly, maybe 500 total, They are approved at our facility and their quality has been great. The latest boards that they are doing for me have 200 components and 74 different types, both surface mount and thru hole. They are turning 60 boards for me in 3 days."
Honeywell FM&T _______________________________________________________________________________________________________________
"You guys did an excellent job. Yes, the first two boards powered up properly. I still have a lot to check on the board. Thanks for your help. We will definitely do more business in the future. I have also recommended your operation to our other corporate divisions in
Medtronic _______________________________________________________________________________________________________________
"Thank you for the fine service Advanced Assembly provided to us in the manufacture of our ESIM boards. We will have a continuing need for PCA assembly and fully intend to use Advanced Assembly in the future."
Aussie Tech _______________________________________________________________________________________________________________
"I received the boards and am in the process of getting ready to test them, I have sent one over to our HQ in Germany also. They certaintly look clean and tidy."
Sennheiser Multimedia R & D _______________________________________________________________________________________________________________ We received the boards on Saturday like you promised, and I'd like to say a BIG Thank You! Hopefully in the future, we won't have to overnight half a dozen packages and put you in this position. The prototypes worked 100% ScanTool.net, LLC
SouthWest Sciences _______________________________________________________________________________________________________________
20100 E , 32nd Parkway, Suite 225 | |
|
AAPCB AssemblyTM,